Setting Caller Id Options - Qwest Q1960 Owner's Manual

Qwest call waiting id cordless telephone
Table of Contents

Advertisement

QT1960_OM
4/6/01
5:28 PM
26
Page 30
You must subscribe to the Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the
caller's name and phone number on the display before you answer the phone.
The handset displays the phone number of the incoming call, the name, time,
and the number of calls. Additionally, you can dial the displayed number, and
store the information for memory dialing.

Setting Caller ID options

There are three Caller ID setup options available; they are AutoTalk, CIDCW
(Caller ID on Call Waiting, also known as Call Waiting ID), and Area Code.
AutoTalk allows you to answer the phone without pressing the
button. If the phone rings when AutoTalk is on, simply remove the
handset from the cradle and the phone automatically answers the call. If the
phone rings when AutoTalk is off, you must press
Caller Waiting ID (also known as Caller ID on Call Waiting or CIDCW)
performs the same as regular Caller ID on a call waiting number.
You must subscribe to Call Waiting ID from your phone company in
order to use this feature.
The Area Code setting is used for dialing and storing numbers directly from the
Caller ID display. You may wish to enter your local area code before you use this
phone for the first time, or if you move to a new area, the phone can then
distinguish local or long distance calls to properly dial directly from the caller ID
record.
If your calling area requires 10-digit dialing,
skip this step.
To change your Caller ID options:
1
Press and hold
The following screen appears.
2
Use
and
to move the cursor to the selection that you would like
to change. Press
Talk and CIDCW.
3
When you wish to enter an Area Code, press
select "Area Code". Then press
code by using the number keypad
-
. After entering Area Code, press
4
After you have made your selections, press
handset to the charging cradle.
to answer the call.
.
to toggle between On and Off for Auto
to move the cursor to
and enter the 3 digits area
and return the
.

Advertisement

Table of Contents
loading

Table of Contents