Qwest Q1960 Owner's Manual page 13

QT1960_OM 4/6/01 5:27 PM Page 13
Charge the battery pack for more than 17 hours before you start using
your phone.
Use only Battery (BT-999) supplied with your phone.
1
Press in on the battery cover
release and slide the cover down
until it comes off.
2
Install the nickel-cadmium
battery with the label facing
down.
3
Slide the battery cover on until
it snaps into place.
4
Place the handset on the base.
5
Make sure that the "status"
LED lights. If the LED doesn't
light, check to see that the AC
adapter is plugged in and that
the handset makes good contact
with the base charging contacts.
9