Qwest Q1960 Owner's Manual page 25

QT1960_OM 4/6/01 5:28 PM Page 25
1
2
3
4
Press the or to
select "Edit Memory",
then press .
The following screen appears.
The cursor flashes indicating that the display is ready for the name to
be edited. When a name has not been stored, the cursor appears at
the beginning of the second line.
5
Press , , ,
page 17.)
To edit only the phone number, skip this step.
6
Press .
The following screen appears.
The cursor flashes indicating
that the display is ready for
the number to be edited.
Press and hold until the
display shows the memory screen and any
saved name/number.
Press and or enter a two-digit
number (01 - 20) to select the memory
location you would like to edit.
Press .
The following screen appears with the
memory location number that you have
selected in the display.
, or to edit the name. (See
21