Wall Mounting; Charge The Handset Battery - Qwest qw5872 User Manual

Installation

Wall mounting

Your phone base unit is designed to mount on a standard telephone wall plate . Wall mounting
is optional .
1 . Plug the adapter into an electrical outlet, and the connector to the bottom of the base unit .
2. Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to the
wall jack.
3 . Line up the tabs on the wall mount adapters with the holes at the bottom of the base unit . Snap the
wall mount bracket firmly in place.
4. Mount the base unit on the wall. Position the base unit so the mounting studs will fit into the holes
on the wall mount bracket . Slide base unit down on the mounting studs until it locks into place

Charge the handset battery

Place the handset in the base . Be sure to charge the battery for at least 16 hours before using your
phone .
• Install the base unit
away from electronic
equipment such as
personal computers,
television sets or
microwave ovens .
Avoid excessive heat,
cold, dust or moisture .