Information To Have Available; Starting Asdm - Cisco ASA 5505 Getting Started Manual

Chapter 7 Scenario: IPSec Remote-Access VPN Configuration

Information to Have Available

Starting ASDM

78-17612-02
Specifying a User Authentication Method, page 7-8
•
(Optional) Configuring User Accounts, page 7-10
•
Configuring Address Pools, page 7-11
•
Configuring Client Attributes, page 7-12
•
Configuring the IKE Policy, page 7-13
•
Configuring IPSec Encryption and Authentication Parameters, page 7-15
•
• Specifying Address Translation Exception and Split Tunneling, page 7-16
Verifying the Remote-Access VPN Configuration, page 7-17
•
Before you begin configuring the adaptive security appliance to accept remote
access IPSec VPN connections, make sure that you have the following
information available:
Range of IP addresses to be used in an IP pool. These addresses are assigned
•
to remote VPN clients as they are successfully connected.
List of users to be used in creating a local authentication database, unless you
•
are using a AAA server for authentication.
Networking information to be used by remote clients when connecting to the
•
VPN, including the following:
IP addresses for the primary and secondary DNS servers
-
IP addresses for the primary and secondary WINS servers
-
Default domain name
-
List of IP addresses for local hosts, groups, and networks that should be
-
made accessible to authenticated remote clients
To run ASDM in a web browser, enter the factory default IP address in the address
field: https://192.168.1.1/admin/.
Implementing the IPSec Remote-Access VPN Scenario
Cisco ASA 5505 Getting Started Guide
7-3