Check For Available Upgrades - Cisco M190 Quick Start Manual

Check for Available Upgrades

10
Review the configuration summary page.
Step 3
Click Install this Configuration.
Step 4
The appliance may not appear to have accepted your configuration or
be performing the installation. This is because you have changed the IP
address, but the installation is underway.
If you temporarily changed the IP address of your computer as
Step 5
described above, change the IP address settings back to the original
values.
Ensure that your laptop and the appliance are connected to the
Step 6
network.
Log in to the appliance again, at the hostname or IP address that you
Step 7
noted in the "Plan the Installation" section on page
admin and the new password that you entered in the wizard.
The Cisco M190 Content Security Management Appliance uses a
self-signed certificate that may trigger a warning from your web
browser. You can simply accept the certificate and ignore this warning.
Be sure to keep your new administrator password in a safe place.
Step 8
After logging in to the appliance, look at the top of the web browser window for
an upgrade notification (or for a notice in the command-line interface.) If an
upgrade is available, evaluate whether you should install it.
For example, make sure that the new version is compatible with the AsyncOS
versions of managed email and web appliances in your environment.
Details about each release are available in the release notes for that Async OS
version.
3. Use the username