Cisco ASA 5505 Getting Started Manual page 59

Chapter 6 Scenario: DMZ Configuration
In the Real Address area, specify the IP address to be translated. For this scenario,
Step 4
address translation for inside clients is performed for the entire 10.10.10.0 subnet.
a.
b.
c.
In the Static Translation area, do the following:
Step 5
a.
b.
c.
Review the configuration pane to verify that the translation rule appears as you
Step 6
expected. The rule should appear similar to the following:
78-17612-02
From the Interface drop-down list, choose the Inside interface.
Enter the IP address of the client or network. In this scenario, the IP address
of the network is 10.10.10.0.
From the Netmask drop-down list, choose 255.255.255.0 for this sccenario.
From the Interface drop-down list, choose the DMZ interface.
In the IP Address field, enter the IP address of the internal client subnet. In
this scenario, the IP address is 10.10.10.0.
Click OK to add the static NAT rule and return to the Configuration > NAT
pane.
Configuring the Security Appliance for a DMZ Deployment
Cisco ASA 5505 Getting Started Guide
6-9