Honda Motorcycle User Manual page 89

3. Adjust the drive chain.
4. Install and tighten the rear axle nut.
Torque: 88 N·m (9.0 kgf·m, 65 lbf·ft).
5. After installing the wheel, apply the brake
pedal several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
P. 66
2
http://mototh.com
Tyre Puncture
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
u Removing Wheels
87