Battery
Negative
terminal
Battery
Bolts
Removing & Installing Body Components
Positive
terminal
Battery holder
http://mototh.com
❙
Removal
Make sure the ignition switch is off.
1. Remove the left side cover.
2. Remove the bolts.
3. Remove the battery holder.
4. Disconnect the negative
the battery.
5. Disconnect the positive
the battery.
6. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of removal.
Always connect the positive
Make sure that bolts and nuts are tight.
The clock will be maintained for 30 minutes
and reset to 1:00 if the battery is
disconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
Battery Goes Dead.
2
u
Battery
P. 54
2
terminal from
-
terminal from
+
terminal first.
+
P. 43
2
P. 88
55