Changing Engine Oil & Filter - Honda Motorcycle User Manual

Engine Oil u Changing Engine Oil & Filter
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious damage to
the engine.
1. If the engine is cold, idle the engine for 3
to 5 minutes.
2. Turn the ignition switch off, stop the
engine and wait for 2 to 3 minutes.
3. Park on a firm, level surface and lower
the side stand.
4. Place a drain pan under the drain bolt.
58
5. Remove the oil fill cap, drain bolt, and
sealing washer to drain the oil.
6. Remove the oil filter cover, oil filter,
spring and gasket by removing the oil
filter cover bolts.
u Discard the oil and oil filter at an
approved recycling centre.
http://mototh.com
Sealing washer
Drain bolt