Battery - Honda Silverwing SW-T600 2010 Owner's Manual

Battery

Negative terminal
Battery
Battery cover
Honda Silverwing SW-T600 Owner's Manual
Removing & Installing Body Components
Positive
terminal
Screw
http://www.motorcycle.in.th
❙ Removal
Make sure the ignition switch is OFF.
1. Open the seat.
2. Remove the screw and battery cover.
3. Disconnect the negative
remove the battery lead.
4. Disconnect the positive
remove the battery lead.
5. Pull out the battery taking care not to
drop the terminal nuts.
Installation
❙
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
"Maintenance Fundamentals."
Battery Goes Dead
Battery
a
P.35
terminal and
terminal and
P.46
P.81
57