Instructions For Use; A Cooking With The Timer - Cuisinart Cook and Hold User Manual

Instructions for Use

Before using this appliance, ensure the ceramic pot, cooking rack and lid are cleaned and dry.
A Cooking with the timer
ß Place the housing base on a fl at, clean and dry surface. Place the ceramic pot in the housing base.
ß Fill the ceramic pot with desired ingredients. Place the lid on top of the ceramic pot and plug the unit into the
mains.
ß Set the desired time by turning the timer dial to the recommended cooking time: 1-8 hours using half hour
increments.
ß Set the desired temperature, by turning the temperature dial to 'Low' or 'High' setting.
N.B. The 'Hold' setting is not a cooking function, it is only for used to keep cooked food warm and ready to
serve.
ß The 'Cook' indicator light will illuminate to denote the appliance is in 'Cook' mode and set on 'Low' or 'High'
temperature setting.
N.B. If the timer is set to '0 hours', the appliance will remain in ''Hold'' mode no matter what the
temperature states.
ß When the time has expired, the appliance will automatically switch to the 'Hold' setting and the 'Hold' light will
illuminate. This will remain illuminated until the appliance is turned off.
ß To turn the appliance off, turn the temperature dial to the 'Off' position.
ß Lift the ceramic pot by using the ceramic handles.
9