Cuisinart Compact Sparkling Beverage Maker Quick Start Manual

Read before operating your new Compact Sparkling Beverage Maker.
1. Fill the beverage bottle with chilled water up to the indicated "Water Fill
line."
2. insert the carbonator head into the bottle and screw down firmly until it is
tightly fitted to the bottle (fig. a).
3. Use the toggle to make sure the safety window is fully open on the charger
chamber.
4. insert a disposable CO
narrow end facing down (fig. b), and ensure the charger is inserted firmly in
place by gently pushing the disposable CO
NOTE: Only use Cuisinart CO2 Chargers powered by SodaSparkle.
5. Place the correctly filled beverage bottle with attached carbonator head in an
upright and stable position on a clean, flat surface. lower the charger chamber
down onto the carbonator head to engage the activating thread (fig. c). Screw
the charger chamber clockwise onto the carbonator head. the safety window
will automatically close and lock prior to piercing the CO
6. Continue to firmly turn the charger chamber clockwise until you can not tighten
anymore and the CO
bottle and hear a hissing sound and small associated release of excess CO
through the carbonator head safety release valve – a normal part of the
carbonation process. NOTE: Wait at least 30 seconds for full carbonation to
take place.
7. Shake the bottle thoroughly for 5 seconds (fig. d) to complete the carbonation
process.
8. Slowly unscrew and remove the charger chamber from the carbonator head.
Slide the safety window open using the slider button and eject the used CO
charger through the window by pushing your index finger through the hole
provided.
9. Slowly unscrew the carbonator head and remove, then enjoy your sparkling
water. NOTE: Once opened, use only the standard bottle cap to reseal the
bottle. The sparkling nozzle cap should be used only when carbonating.
if you would like, you can add a natural flavor stick to your 8 oz. glass of
sparkling water for a refreshing, flavored soda (fig. e).
NOTE: Never pour in flavor before carbonating.
10. the supplied bottle cap will maintain a residual pressure and can be placed on
the bottle to keep the contents from going flat (fig. f).
For Best Results
• Use only chilled water for carbonation.
• always fill bottle to maximum fill
indicator line, never overfill.
QUICK START GUIDE
Do not throw away these instructions.
Keep for future reference.
these helpful hints are intended to be a supplement to the instruction
Booklet. in order to ensure safe operation and optimum performance,
please read the entire instruction Booklet.

OPERATING INSTRUCTIONS

charger into the open window of the charger chamber,
2
charger is pierced. You will see the CO
2
Caution
• never freeze the bottle or its contents.
• Carbonate only once.
• Do not move toggle before
unscrewing charger chamber.
See reverse side for troubleshooting Guide.
Compact Sparkling
Beverage Maker
IMPORTANT!
charger back until you hear a click.
2
charger.
2
release into the
2
fig. a
fig. b
fig. c
2
fig. d
2
fig. e
fig. f