Aastra DT390 User Manual page 92

Cordless phone for businessphone

Hide thumbs Also See for DT390:

Table of Contents

15.10

1424-EN/LZT 103 091 Uen D 2010-02-12

Headset Profiles

In order to achieve optimal audio quality with the different headset types,

it is recommended that you select the corresponding profile. The default

setting is microphone on a boom, meaning that the audio is optimized for

using a headset with microphone on a boom.

To change the headset profile, do the following:

Press Menu, select

Select Headset and press Select

Select Mic on boom or Mic on cable, and press Select.

Press Back to save the setting.

If the pre-configured headset profiles do not match the headset in use,

or if the audio quality is low, it is possible to configure a new headset

profile. This is done in WinPDM or CPDM by the system administrator.

, and press Select.

ETTINGS

Table of Contents