Manually Selecting An Ethernet Ip Address - Konica Minolta magicolor 3300 Installation Manual

Manually Selecting an Ethernet IP Address

You must enter a unique IP address compatible with your local Ethernet
network environment.
Manually setting an Ethernet IP address automatically disables DHCP.
Attention
You should always notify your network's administrator before changing
the printer's IP address.
1
Turn on your printer.
2
On the control panel, change the IP address of your printer:
Press key
Online
Menu
Next
Select
Select
Previous
Select
Select
Previous
Select
Next
Select
About the Control Panel
Press Select to access a menu or to choose a displayed menu
option.
Press the Previous key to return to the previous selection or
option for the current menu. When changing character
information, use this key to return to the previous choice
for the current input character.
Press the Next key to advance to the next selection or option
in the current menu. When changing character information,
use this key to advance to the next choice for the current input
character.
IDLE (and the Online button is off)
CONFIGURATION/OPERATOR CONTROL
CONFIGURATION/ADMINISTRATION
ADMINISTRATION/COMMUNICATIONS
COMMUNICIATIONS/TIMEOUTS
COMMUNICATIONS/RESIDENT NIC
RESIDENT NIC/CROWNNET
CROWNNET/COMMON
CROWNNET/TCP/IP
TCP/IP/PROTOCOL
TCP/IP/INTERNET ADDRESS
INTERNET ADDRESS/XXX.XXX.XXX.XXX
(Until) display reads
27