General Purpose Broadcast Input - Toa Venas VM-2120 Cookbook

GENERAL PURPOSE BROADCAST
Inputs 1 – 3 can be set for a microphone signal input level ( –60 dB, 600 Ω) or a line signal input level
( –10 dB, 600 Ω) by moving the SETTINGS switch in Fig. 1 to the ON or OFF position. The three inputs also
feature Neutrik connectors that permit connection to XLR connectors and phone plugs. Furthermore,
Input 1 can also be used for DIN plugs as well.
Equipment that can be connected to these input includes:
• Dynamic microphones
• Paging microphones
• Wireless tuners
• Background music players
Fig. 1
All switches No. 1 – 8 are factory-preset to the OFF position.
1 2 3 4 5 6 7 8
ON
SETTINGS
Switch No.
Function
OFF (Up position)
ON (Down position)
Input 1-3 (MIC/LINE)
1
1
Phantom Power* Telephone Paging
OFF Chime ON
ON Chime OFF
Usable connectors and plugs
• XLR type male connector
Pin 1: Ground
Pin 3: Cold
DIN connector
XLR type connector
2 3 4
Chime Selection
See the Chime
Selection table
1
* Simultaneously turns on or off the phantom power of Inputs
1 – 3. For the method to switch off the phantom power for the
individual Inputs 1 to 3, consult the shop from whom the unit was
purchased.
4
-1-
1
INPUT
• Phone plug
Sleeve: Ground
Pin 2: Hot
Ring: Cold Tip: Hot
Phone plug
5 6 7
Input 3 Input 2 Input 1
Mic Mic
Line Line
8
Mic
Line