Ptz Setting; Ptz Camera Confi Guration; Confi Guration Check List - Mitsubishi Electric DX-TL4516E Installer Manual

PTZ Setting

This menu is used to make the settings for the cameras to be
controlled.
PTZ Camera Confi guration
This item is used to make the detailed settings for the
cameras to be controlled.
System Menu
2 PTZ Setting
1 PTZ Camera Configuration
1. Select the camera number to be set.
step
2. Set the detailed settings for the camera number
step
selected in step 1.
Device: Setting for the type of the camera or
controller connected.
Port: Setting for the output terminal of the control
signal. This item is automatically set depending on
the input of the camera or the controller.
Device ID: Setting for the address of the camera
to be controlled. Make the same settings as the
camera or the controller.
P a n R e v e r s e : R e v e r s e s t h e p a n d i r e c t i o n
depending on the installation conditions.
Tilt Reverse: Reverses the tilt direction depending
on the installation conditions.
Confi guration Check List
This item is used to check the connecting status of the
camera or the controller, and the address and port set in
<PTZ Camera Confi guration>.
System Menu
2 PTZ Setting
2 Configuration Check List
D
1. Select <Configuration Check List> in the <PTZ
step
Setting> menu.
72
Configuration Check List
System Menu