Data Clear; Main Storage Memory; Copy 1/Copy 2 - Mitsubishi Electric DX-TL4516E Installer Manual

Data Clear

Main Storage Memory

This item is used to delete the data of the normal area, alarm
area, or LPA area in the main device.
"Data in Alarm Area" can be set when "Alarm Recording
Area" ( page 77 "Change Partition Setting") is set to
other than "0 %."
"Data in Long-Pre-Alarm Area" can be set when "Long
Pre-Alarm Area" ( page 77 "Change Partition Setting")
is set to other than "0 %."
System Menu
6 Data Clear
1 Main Storage Memory
1. Select "Clear" of the area which contains the data to
step
be deleted.
2. Select "Execute."
step
• "Data clear was completed." appears on the
screen when completing the data clear.
When disk management password has been registered
and PASSWORD LOCK is turned on, and the main de-
vice data deletion is executed, the screen for unlock disk
management appears. Unlock the PASSWORD LOCK
fi rst for deleting the data.
Data cannot be deleted while accessing to the HDD such
as playback/recording/copying/restoring.

Copy 1/Copy 2

This item is used to delete the data of each group in the copy
1 or copy 2 device.
System Menu
1
step
6 Data Clear
Copy 1
2
Copy 2
3
1. Select copy 1 or copy 2 device.
step
2. Select "Clear" of the group which contains the data
step
to be deleted.
3. Select "Execute."
step
• "Data clear was completed." appears on the
screen when completing the data clear.
You can delete the data in the copy device even during
data is being recorded in the main device.
Deleting the data of the DVD takes about 30 or 40 min-
utes.
System Menu
2, 3
steps
Operations
79