Controlling The Camera; Ptz Control Using The Menu; Ptz Control Using The Front Panel Buttons - Mitsubishi Electric DX-TL4516E User Manual

Controlling the camera

This function is used to control the cameras connected via
RS-232C or RS-422/485 terminal.

PTZ control using the menu

User Menu
6 PTZ Control
1 Go to PTZ Control
Zoom, iris, focus adjustment, AutoPan
Preset
2 Select PTZ Camera
1. Pan or tilt the PTZ camera connected.
step
• Click the gray area by using the mouse to adjust
the camera angle.
adjusts the
camera angle
in the leftward
direction
2. Adjust zoom, iris, and focus. And activate auto pan.
step
3. Preset the viewing points 1 to 16.
step
• The preset points are registered to the PTZ
camera for auto pan function.
4. Switch the camera number to be controlled.
step
• The camera number to be controlled appears on
the LCD display on the front panel.
01-01-2006 00:00:00
PTZ CAM1
<PTZ Control> can be set using the mouse only. You can-
not set it using front panel buttons.
14
1
step
2
step
3
step
4
step
adjusts the camera angle
in the upward direction
adjusts the
camera angle
in the rightward
direction
adjusts the camera angle
in the downward direction

PTZ control using the front panel buttons

1. Press the camera number button of the PTZ camera
step
number to be controlled and display the picture in
the single screen display.
2. Press the PTZ button.
step
• The unit switches to PTZ mode and the button
lights up. "PTZ" appears on the LCD display on
the front panel during PTZ mode.
01-01-2006 00:00:00
PTZ
• The camera number to be controlled appears on
the LCD display on the front panel.
01-01-2006 00:00:00
PTZ CAM1
3. Control the camera.
step
Tilt: Press the TILT
the upward direction. Press the TILT
tilt the camera in the downward direction.
Pan: Turn the SHUTTLE ring to the right to pan
the camera in the rightward direction. Turn the
SHUTTLE ring to the left to pan the camera in the
leftward direction.
Camera zoom: Press the CAMERA ZOOM button
and then turn the JOG dial to the left (wide) or
right (tele) to adjust the camera zoom.
Focus: Press the FOCUS button and then turn the
JOG dial to the left (far) or right (near) to adjust the
focus of a camera.
Iris: Press the IRIS button and then turn the JOG
dial to the left (close) or right (open) to adjust the
iris of a camera.
Preset: Press the PRESET button and then press
the camera number buttons within 3 seconds to
preset the viewing points. Up to 16 points can be
set.
Auto pan: Press the AUTO PAN button to activate
the auto pan function of the camera.
During PTZ operation using front panel buttons, POWER
button and functions related to playback do not work. Fur-
thermore, menus cannot be displayed.
button to tilt the camera in
button to