Table of Contents
Advertisement
User's Manual
Panic Button
Pressing the
button activates panic recording, so the DVR will record video regardless of
PANIC
the time-lapse or event recording schedule. Press the button again to release the panic recording.
NOTE: When the DVR is in the Panic recording mode, the REC LED flickers and
on each camera screen.
Camera Buttons (1 to 4)
Pressing the individual camera buttons will cause the selected camera to display full screen. They
are used to enter passwords. The camera buttons also function in the PTZ mode. Pressing
zooms in in the PTZ mode, and pressing
CAMERA 1
is used to control near focus of the PTZ camera in the PTZ mode.
CAMERA 3
control far focus of the PTZ camera in the PTZ mode.
Quad/Sequence Button
Pressing the
QUAD/SEQUENCE
mode. It also loads a Preset Apply in the PTZ mode.
PTZ Button
Pressing the
button opens a Pan/Tilt/Zoom screen which allows you to control properly
PTZ
configured cameras.
In the PTZ mode, pressing the
again in the digital zoom mode returns to the live monitoring mode. When a PTZ device is not
installed, pressing the
button enters the digital zoom mode directly.
PTZ
Pressing the
button in the playback mode enters the digital zoom playback mode.
PTZ
NOTE: When the DVR is in the PTZ mode, a white line will display around the image.
NOTE: In the digital zoom mode and digital zoom playback mode, a bright small box is laid
over the image. The box indicates the area to be enlarged.
Arrow Buttons
Arrow buttons are used to navigate through menus and GUI. They are also used to control Pan and
Tilt in the PTZ mode, and to move the specific area of screen that you want to enlarge in the digital
zoom mode.
In the playback mode, the Up-Arrow button selects the next image, and the Down-Arrow button
selects the previous image. Pressing the Left-Arrow button plays video backward at high speed.
Pressing the button again toggles the playback speed from
,
and
respectively. Pressing the Right-Arrow button plays video forward at high
speed. Pressing the button again toggles the playback speed from
displays
,
and
respectively.
Entering Playback mode from Live Monitoring mode can be user password protected.
10
CAMERA 2
button toggles between quad (2x2) display mode and sequence
button enters the digital zoom mode, and pressing the button
PTZ
displays
zooms out in the PTZ mode.
is used to
CAMERA 4
,
and
. The screen displays
,
and
. The screen
Advertisement
Table of Contents
