Power Management Setup Page - ECS P6STMT2 User Manual

Mainboard User's Manual

Power Management Setup Page

This page sets up some parameters for system power management
operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Power Management/APM
Standby Time Out(Minute)
Suspend Time Out(Minute)
Hot Key Power On
OnBoard LAN Power On
Ring On Power On
RTC Alarm Power On
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Power Use this item to enable or disable a power
Management/APM management scheme. If you enable power
management, you can use the items below to
set the power management operation. Both
APM and ACPI are supported.
Standby Time Out
This sets the timeout for Standby mode in
minutes. If the time selected passes without any
(Minute)
system activity, the computer will enter power-
saving Standby mode.
Suspend Time Out This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
(Minute)
system activity, the computer will enter power-
saving Suspend mode.
Hot Key Power On
If you enable this item, you can turn the system
on by pressing hot keys (Ctrl+Alt+BackSpace)
on the keyboard. You must connect an ATX
power supply and enable the jumper in order to
use this feature.
OnBoard Lan
The system can be turned off with a software
command. If you enable this item, the system
Power On
can automatically resume if there is traffic on
the network adapter. You must use an ATX
power supply in order to use this feature.
26
APM/ACPI
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
ESC : Quit
15
F1 : Help
12
F5 : Old Values (Shift)F2 : Color
30
30
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
↑↓←→ : Select Item
PU/PD/+/- : Modify