Chapter 1: Introduction - ECS P6STMT2 User Manual

1: Introduction
Chapter 1
Introduction
This mainboard has a Socket-370 processor socket for Intel
FCPGA Celeron, FCPGA Pentium III or Tualatin/Tualatin
Celeron processors. You can install any one of these processors
on this mainboard.
This mainboard supports front-side bus speeds of 66MHz,
100MHz or 133MHz.
This mainboard has the GFXcel chipset which provides CPU Plug
& Play through firmware, integrates a 128-bit AGP Graphics
Accelerator and has an embedded 10BaseT/100BaseTX Network
Interface. There is a full set of ATX I/O Ports including PS/2
keyboard and mouse ports, two USB ports, one parallel port, one
serial port, one VGA port and one MIDI/game port. There is an
onboard header USB1 making two extra USB ports by connecting
the extended USB module to the mainboard.
This mainboard has all the features you need to develop a powerful
multimedia workstation of network ready and built-in
communications. This board is Micro-ATX size and has power
connector for an ATX power supply.
1