2.
Scroll up or down to select bands for Close Call to monitor.
Press Prog. The screen displays that selection and "On. "
You cannot turn off all bands. If you turn off all bands, B1 LO is
automatically set to ON.
Setting
This menu controls whether the scanner will send an alert tone
when a Close Call signal is detected. The options are:
•
- Scanner beeps when a CC signal is found.
•
- Scanner does not beep when a CC signal is found
Setting
This menu controls whether the scanner will screen common
pager frequencies. The options are:
•
- Scanner screens out pager frequencies (filter on).
• PS.OFF - Scanner allows pager frequencies (filter off ).
Options
Options
47