Uniden UBC355XLT Owner's Manual page 32

If You Want to do This - Here's How -
Set up multiple service
banks to scan
Stop scanning
Resume scanning
32
Press a desired service bank's key until
it displays. Continue pressing other
banks' keys until all desired banks are
displayed (activated).
Press Hold. The scanner stays on the
displayed channel until scanning
is resumed. The bank's screen label
remains steady and does not flash.
Press one of the following keys to
continue scanning:
Hold – Press this key to release the
•
Scan Hold and continue scanning.
The bank's screen label resumes
flashing.
Up or down - Press these keys to
•
step to the next/previous frequency.
Scan Hold remains active but single
channels can be monitored.