Table of Contents
Advertisement
Permanent Mobile Installation
Permanently installing the UBC355XLT scanner into a vehicle
involves two main steps - physically installing the scanner and
physically connecting the power supply. It does not matter which
is installed first; perform these procedures in an order that is most
appropriate for your vehicle's configuration.
Permanently Mounting the UBC355XLT Unit
1.
Select a location in your vehicle to mount the UBC355XLT unit.
Avoid any locations that could interfere with your driving. In a
passenger car, the ideal location is underneath the dashboard
on the passenger side.
2.
Use the mounting bracket (optional) as a template for
marking the location of the mounting screws. Note: If there
are screws already holding the dashboard, you may be able to
use the same screw holes to mount the bracket.
3.
Drill the necessary holes and secure the mounting bracket in
place using the screws provided.
CAUTION: do not drill into air bags . do not drill if what is
behind the dashboard is unknown .
16
Hide quick links:
Advertisement
Table of Contents
