Close Call Priority; Close Call Do Not Disturb; Close Call Only - Uniden UBC355XLT Owner's Manual

3. Close Call Off
Pressing and holding the

Close Call Priority

Repeatedly press
The scanner checks every 2 second for a nearby transmission. You
may hear a slight break in audio during this time. If you want to
monitor only Close Call hits, hold the
seconds. The Close Call Priority icon flashes.

Close Call Do Not Disturb

Repeatedly press
The scanner will periodically make Close Call checks whenever it is
not receiving audio in another mode.

Close Call Only

Press and hold
the icon flashes. The scanner is now in Close Call Only mode. It will
only try to find Close Call transmissions. This is also the first step to
accessing the Close Call Setup modes.
44
key activates Close Call Only mode.
until the Close Call Priority icon
until the Do Not Disturb
until the scanner displays a line of dashes and
key for longer than 2.5
icon displays.
displays.