Panasonic KX-NCP500 Manual page 66

4.4.2 Setting the VLAN Parameters
KX-NT265 (software version 2.00 or later only)
After assigning
the IP addresses
Press SP-PHONE.
To end programming
HOLD
Press HOLD to return
to the Menu screen.
66 IP Networking Guide
Press VOLUME to
Press SP-PHONE.
select "QoS".
VLAN ID
1–4094
Press STORE.
Press VOLUME to Press SP-PHONE.
select "VLAN".
VLAN Priority
Press SP-PHONE. 0–7
The IP-PT will reboot
and can then be
registered to the PBX.
Press VOLUME to
select "VLAN (Enable)".
Press SP-PHONE.
Document Version 2009-12