Panasonic KX-NCP500 Manual page 65

KX-NT321
After assigning
the IP addresses
Select "VLAN (Enable)".
To set the VLAN ID for the primary port
Select "VLAN (Primary)".
Select "Priority".
To set the VLAN ID for the secondary port
Select "VLAN (Secondary)".
Select "Priority".
To end programming
Press HOLD three
times to return to the
Menu screen.
*1 The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
Document Version 2009-12
Select "QoS". Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE. Select "VLAN ID".
1
VLAN Priority*
0–7
Press SP-PHONE. Select "VLAN ID".
1
VLAN Priority*
0–7
Press STORE.
4.4.2 Setting the VLAN Parameters
Select "VLAN".
VLAN ID
1–4094
Press SP-PHONE.
VLAN ID
1–4094
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
IP Networking Guide 65