Panasonic KX-NCP500 Manual page 50

4.4.1 Assigning the IP Addressing Information
KX-NT265 (software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To enter the IP address of the IPCMPR card (PBX IP Address)
Press VOLUME
to select "PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
50 IP Networking Guide
Press PROGRAM
while "Searching" is displayed.
PBX IP
Address
Press SP-PHONE
twice.
The IP-PT will reboot
and can then be
registered to the PBX.
HOLD
Press SP-PHONE. Press HOLD to return
to the Menu screen.
Document Version 2009-12