Panasonic KX-NCP500 Manual page 35

Installing the Activation Key File in the SD Memory Card
1.
Start the Maintenance Console from the Start menu.
2.
From the Utility menu, select File Transfer PC to PBX (SD Card).
A dialog box will be displayed.
3.
Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
4.
Click OK.
5.
Under Configuration, click Slot.
6.
Click Activation Key.
7.
For IP Trunk activation key file(s), click Execute.
A confirmation message will be displayed. Click Yes.
Notice
The activation key file can only be installed in the PBX with the MPR ID number entered when the activation
key file was downloaded. The activation key file cannot be reissued unless the IPCMPR card crashes.
Configuration of the Activation Keys
Depending on your configuration, it may be necessary to program the number of provided IP Trunk channels
to be used for H.323 CO lines. By default, all of the provided IP Trunk channels will be used for SIP CO lines.
Similarly, you can program how many IP softphones can be used through the IP Softphone/IP Proprietary
Telephone activation key. By default, only IP softphones can be used through the IP Softphone/IP Proprietary
Telephone activation key.
Note
For a detailed explanation about activation keys, refer to "2.1 Information about the Activation Keys" in
the Installation Manual.
Document Version 2009-12
4.1.2 Installing Additional Activation Keys
1. a.
Under Configuration, click Slot.
b.
Click Activation Key.
2. a.
In the The number of activated IP-GW box, type
the number of IP Trunk channels to be used for H.
323 CO lines.
b.
In the The number of activated IP Softphone box,
type the number of IP softphones to be used through
the IP Softphone/IP Proprietary Telephone
activation key.
3. Click OK.
Note
A confirmation message will be displayed if you have
changed the number in the The number of
activated IP-GW box.
When the message is displayed, click Yes.
IP Networking Guide 35