›
Carefully remove the connector from the tail lamp assembly in the direction of
the arrow
.
2
Install
›
Insert the connector into the lamp and lock it securely.
›
Insert the light vertically into the mounts on the bodywork
›
Carefully press the tail lamp assembly into the bodywork so that the bolts
» Fig. 183
on page 206 on the light latch with the mounts in the
1
›
Be careful not to pinch the cable bundle between the bodywork and light.
›
Screw the tail lamp into place and install the cover.
Ensure that the cover engages firmly.
CAUTION
Ensure that the cable bundle is not pinched when re-installing it between the
■
bodywork and the light - risk of damage to the electric installation and water in-
gress.
If you are not sure whether the cable bundle was not pinched, we recomment
■
you have the connection to the light checked by a ŠKODA partner.
Replacing the bulbs in the tail lamp assembly
Fig. 183 Outer part of the light: Basic light/light with LED diodes
206
Do-it-yourself
» Fig. 182
- .
body»
.
Fig. 184 Inner part of the light: Basic light/light with LED diodes
Outer part of the light
›
Turn the bulb holder
ing.
›
Replace the bulb, insert the holder with the bulb into the lamp housing and turn
in a clockwise direction to the stop.
Inner part of the light
›
Unscrew the lamp holder
tool kit, and remove the lamp holder from the tail light assembly.
›
Turn the bulb holder anti-clockwise up to the stop and remove it from the lamp
housing
›
Replace the bulb, insert the holder with the bulb into the lamp housing and turn
in a clockwise direction to the stop.
›
Insert the bulb holder in the tail lamp assembly.
›
Screw on the lamp holder carefully.
First read and observe the introductory information and safety warn-
ings
on page 202.
» Fig. 183
anti-clockwise remove it from the lamp hous-
2
» Fig. 183
- or with the screwdriver from the car
» Fig. 183
- or .