Note
If there is anything you are not sure about concerning fluids, please consult a
■
ŠKODA Partner.
Fluids with the correct specifications can be purchased from ŠKODA Original Ac-
■
cessories.
Opening and closing the bonnet
Fig. 146 Bonnet/radiator grille release lever: Release lever
Fig. 147 Securing the bonnet
First read and observe the introductory information and safety warn-
ings
on page 169.
When the front door is closed, the bonnet cannot be unlocked with lever
Opening
›
Open the front left door.
›
Pull the release lever under the dash panel in the direction of the arrow
» Fig.
146.
1
Before opening the bonnet, ensure that the arms of the windscreen wipers are
correctly in place against the windscreen otherwise the paintwork could be dam-
aged.
›
Press the release lever in the direction of the arrow
locked.
›
Grab hold of the bonnet and lift.
›
Take the bonnet support out of its holder
secure the opened bonnet by inserting the end of the support in the opening
designed for it.
Closing
›
Lift the bonnet slightly and unhook the bonnet support. Insert the bonnet sup-
port into the holder
›
Let the bonnet drop into the lock carrier lock from a height of around 20 cm – do
not push it in!
Check whether the bonnet has been closed properly. Also make sure a vehicle
with an opened bonnet does not appear in the instrument cluster dis-
play
» page
21.
.
1
and the bonnet is un-
2
in the direction of the arrow and
3
designed to hold it.
3
Inspecting and replenishing
4
171