Tuner Operation; Setup Menu; Accessing Menu Items; Adjusting A Feature - Jensen VM9423 Operation Manual

VM9423

SETUP MENU

To access system settings, press the SETUP button (31) on
the remote control or touch the button on the screen to
enter the "SETUP" menu. The "GENERAL" sub-menu
appears highlighted in blue.
SETUP
RADIO RADIO
General Language Audio Speaker
RDS
Clock Mode 12 Hour
Rating
Clock Adjust 04 : 31 AM
Demo
Video Input AUTO
Hardware
P.VOL
Beep On
TS Cal

Accessing Menu Items

Touch the sub-menu name or use the joystick to select a sub-
menu (Language, Audio, RDS, etc.).
The features available for adjustment under the highlighted
sub-menu option will appear in the center of the screen.

Adjusting a Feature

1. Use the touchscreen or press the /\ or V buttons on the
joystick to select the feature to be adjusted.
2. Enter the option field for the feature you want to adjust
by using the touchscreen or pressing the ENTER
(joystick) button. A submenu appears in a second row
with the selected option highlighted in blue.
3. Select a new value by using the touchscreen or pressing
the /\ or V buttons on the joystick.
4. Use the touchscreen or press the ENTER (joystick)
button to confirm setup.
General Sub-menu Features
Setting Options Function
Clock Mode 12 Hour Clock displays 12 hour time using
AM and PM.
24 Hour Clock displays 24 hour time up to
23:59.
Setting Options
Clock Adjust (HH:MM)
02:40
AM
Video Input Auto
(Input cir-
cuitry autode-
tects the
NTSC
video signal
from the Aux
Bluetooth Back
In source).
PAL
Beep On
Off
Language Sub-menu Features
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used.
Setting Options
OSD English
DVD Audio English
Spanish
French
DVD Subtitle English
Spanish
French
Off
Disc Menu English
Spanish
French
Audio Sub-menu Features
Function
The clock appears in the top right Setting
corner of the screen and on the
LCD screen during certain opera- DRC
tions. NOTE: The AM/PM indication
will change as you continue to
adjust the hour past 12.
Sub. W Filter
The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
The color signals are output in the
standard NTSC format.
The color signals are output in the
standard PAL format.
Speaker Sub-menu Features
When turned on, an audible beep
•
tone confirms each function selec-
tion.
No beep sounds. •
•
Function
Bluetooth Sub-menu Features
On Screen Display appears in
English.
Setting
DVD Audio is heard in English
when the option is available.
Bluetooth
DVD Audio is heard in Spanish
when the option is available.
Auto Answer
DVD Audio is heard in French when
the option is available.
DVD subtitles automatically appear
in English when available.
Connect
DVD subtitles automatically appear
in Spanish when available.
DVD subtitles automatically appear
in French when available.
DVD subtitles do not appear auto-
Pairing Code
matically.
DVD menu (if applicable) is dis-
played in English.
DVD menu (if applicable) is dis-
played in Spanish.
DVD menu (if applicable) is dis-
played in French.
10
Options Function
Off Employ the Dynamic Range Control
for better playback for low volumes.
On
50Hz Selecting a crossover frequency
sets a cut-off frequency of the sub-
80Hz
woofer's LPF (low-pass filter).
100Hz
120Hz
150Hz
Choose 4 CH or 4.1 CH depending on the speaker
configuration in your vehicle.
Use the Test Tone feature to verify speaker settings.
Make changes using the EQ/FAD-BAL menu, accessed
by pressing and holding the AUDIO button (volume
control).
Subwoofer Phase Adjustment: Touch the subw icon to
access the subwoofer polarity controls and reverse the
subwoofer signal polarity from 0° to 180°. Reversing
polarity can improve bass response related to speaker
configuration.
Options Function
On Enable Bluetooth function.
Off Disable Bluetooth function.
On The unit automatically answers all
incoming calls.
Off Manually answer calls by touching
the "call" button.
Manual Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
Auto Automatically connect when your
paired phone is in range.
The default code is "1234". Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Not all
phones/devices require a pairing
code. The default code is "0000" for
many models.