Advertisement
Clock Display
Press the T/F button (9) to alternate the display between Playback mode and clock time while in
Tuner, Bluetooth or auxiliary input mode.
Clock Setup
Press and hold the T/F button (9) to access Clock Setup mode. The number representing the
hours will flash. Press VOL +/- buttons to adjust the hour. Press T/F again briefly and the number
representing the minutes will flash. Press the VOL +/- buttons to adjust the minutes. The new time
will be saved 5 seconds after the last adjustment is made.
Speaker Output
The two speaker output buttons (5) (SPEAKER A and SPEAKER B) control speaker output from
the radio. Press any of the two buttons to turn the corresponding speaker sets on or off.
TUNER OPERATION
Select a Band
Press BAND (3) to change between three FM bands (FM1, FM2 and FM3) and two AM bands
(AM1 and AM2).
Manual Tuning
Press the tune up (1) or tune down (2) buttons to tune the frequency one step higher or lower.
Press and hold to seek tune to next strong station.
Preset Stations
Six numbered preset buttons store and recall stations for each AM and FM band.
Store Preset Stations
Select a band (if needed), then select a station. Hold a preset button for one second. The current
station will be stored, and the corresponding preset number will appear in the display.
Recall Preset Stations
Select a band (if needed). Press a preset button momentarily, and the unit will tune to the
corresponding stored station.
Automatically Store / Preset Scan (A/PS)
Automatically Store
Press and hold the A/PS button (10) for more than one second, and the unit will automatically scan
for and store six strong stations for all bands. To stop this function before the automatic storing is
complete, press A/PS again.
Preset Scan
Press A/PS to scan all preset stations in the current band. The unit will play each station for five
seconds before moving on to the next station. To stop this function and play the current station,
press the A/PS button again.
7
JWM1A
Advertisement
