Lenovo ThinkPad X200si Hardware Maintenance Manual page 38

www.battery-adapter.com
Table 22. Removal steps of base cover assembly for ThinkPad X200, X201, and
X201i (continued)
In step 5 and 6 , remove the system board, the DC-in connector, and the fan
assembly together from the base cover assembly.
When installing: Check the position of the wireless switch a , and firmly fit
the system board into the base cover assembly.
Note: Following step is only for ThinkPad X201 and X201i.
Cable routing: Route the speaker cable as shown in this figure.
120
ThinkPad X200, X200s, X200si, X201, X201i, and X201s Hardware Maintenance Manual
a
7
7
www.battery-adapter.com
5
6