Lenovo ThinkPad X200si Hardware Maintenance Manual page 17

www.battery-adapter.com
Table 13. Removal steps of palm rest (continued)
When installing:
1. In models with the fingerprint reader, attach the fingerprint reader connector
firmly to the system board.
2. Press the left and right top edges of the palm rest to fit it into place.
3. Push the front side of the palm rest until it clicks into place.
1
1
2
2
4. Close the LCD cover and turn the computer over. Then fasten the five screws
to secure the palm rest.
99
Removing and replacing a FRU
www.battery-adapter.com