Belkin F5D7000 User Manual page 31

Using the Belkin Wireless Networking Utility
128-Bit WEP Encryption
1.
Select "WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your key
manually by typing in the hex key manually, or you can type in a
passphrase in the "Passphrase" field and click "Generate" to create a key.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 hex keys.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
3.
Click "Save" to finish. Encryption in the wireless router (or access
point) is now set. Each of the computers on your wireless network
will now need to be configured with the same security settings.
WARNING:
If you are using a wireless client to turn on the security settings in
your wireless router (or access point), you will temporarily lose your wireless
26 26