Belkin F5D7000 User Manual page 28

Using the Belkin Wireless Networking Utility
2.
Push-Button Configuration (PBC) Method.
3.
Advanced Configuration Method: For manual connection to a
secured network.
WPS uses WPA2 (described below) for encryption. It does not provide
additional security. Instead, it standardizes the method for securing
your wireless network. On your client utility, WPS-enabled networks
are denoted with the key icon. You may use either the PBC method
or PIN method to allow a device access to your wireless network. The
two methods work as follows:
PBC: Push and hold the WPS button located on the back of your
router for three seconds. Then, initiate the WPS procedure on the
client utility within two minutes. Select the network name in the utility
and click "Connect". Your client will automatically exchange the
security information and be added to your wireless network. The PBC
method can also be initiated from the client device.
You will see the following message
if the procedure is initiated from
the router:
If the process is started from the
client, you will see this message:
PIN: Your notebook computer has
an 8-digit PIN that is associated with WPS. Select the WPS-enabled
network and click "Connect" to
start the WPS process. Choose the
PIN-method option and complete
the WPS procedure on your
router's setup utility.
You will see the following message during the connection process:
23 23
1
2
3
4
5
6