Using the Belkin Wireless Networking Utility
Click "Edit" to change settings.
WEP Setup
64-Bit WEP Encryption
1.
Select "WEP" from the drop-down menu.
2.
the wireless router (or access point). If you don't remember the hex key,
your client will be locked out of the wireless router (or access point).
After selecting your WEP
encryption mode, you can enter
your key by typing in the hex key
manually, or you can type in a
passphrase in the "Passphrase"
field and click "Generate" to
create a key.
A hex (hexadecimal) key is a
combination of numbers and letters
from A–F and 0–9. For 64-bit WEP,
you need to enter 10 hex keys.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
3.
Click "Save" to finish.
Encryption in the wireless router (or
access point) is now set. Each of your
computers on your wireless network
will now need to be configured with
the
same security settings.
WARNING:
If you are using a wireless
client to turn on the security settings in
your wireless router (or access point),
you will temporarily lose your wireless
connection until you activate security
on your wireless client. Please record
the key prior to applying changes in
25
25
1
2
3
4
5
6