Belkin F5D7000 User Manual page 29

Using the Belkin Wireless Networking Utility
The client will be automatically
enrolled into your wireless network
within two minutes.
If desired, you may connect
manually to a WPS-enabled
network. Click on the "Advanced"
tab to open the following window:
Enter in the encryption key and security
method in order to join this network. The
following section describes how to connect
to a secure network that does not support
WPS.
To connect to a secure network, you will
first need to determine which standard is
used by the router or access point. (See
your wireless router's or access point's
manual for directions on how to access the
security settings.)
To access the security settings on your Card, click the "My Connections" tab
and point to the connection for which you want to change security settings.
24 24