FujiFilm FinePix30i Service Manual page 35

U/e/eg_model

Hide thumbs Also See for FinePix30i:

Table of Contents

FinePix30i(U/E/EG) SERVICE MANUAL

(3) After a short interval the screen currently being adjusted is followed by a message requesting removal of the LB140

filter. Follow instructions.

Press the Enter key on the PC keyboard when preparations are complete (Fig.28).

Press the Enter key on the PC keyboard to display the screen currently being adjusted (Fig.29).

(4) After a short interval the screen currently being adjusted is followed by a message requesting insertion of the LB140

filter. Follow instructions.

Press the Enter key on the PC keyboard when preparations are complete (Fig.30).

Press the Enter key on the PC keyboard to display the screen currently being adjusted (Fig.31).

(5) After a short interval CAM adjustment is completed following the screen for adjustment of calculated values. An

instruction screen for return to the menu screen is displayed. Press the Enter key on the PC keyboard to return to the

menu (Fig.32).

Fig.28

Fig.30

Fig.32

4.Adjustment

Fig.29

Fig.31

Table of Contents