Passenger Footpeg
The passenger footpeges
(l)
can be set to
two positions. The forward position is the
standard location. To set to the rear
position, remove the footpeg bolt (2)
and the saddlebag bracket bnlt (3). Install
the footpeg and its bolt where the saddle·
bag bracket bolt used to be, making sure to
align the tab (4) of each footpeg with the
hole (5) in the bracket.
FORWARD POSITION (STANDARD)
(1) Passenger footpeg
(2) Mounting bolt
(3) Saddlebag bracket bolt
NOTE:
*
Install the right footpeg on the right
side, and the left footpeg on the left
side.
CAUTION:
'" Make sure
to
securely tighten both
!ootpeg bolts when moving the !ootpeg.
REAR POSITION
(4) Tab
(5)
Hole