Hitachi CJ 14DL Technical Data And Service Manual page 7

Model
Capacity
No-load speed
Length of stroke
Min. cutting radius
Type of motor
Type of switch
Max. cutting angle
LED light
Enclosure
Battery
(Type: EBM 1830)
Charger
(Model UC 18YRL)
Net
Weight
Gross
(2MRK)
Standard
accessories
(NN)
Max. cutting thickness
Trigger switch with rotation selector and brake (with ON-OFF lock)
Housing --------- Glassfiber reinforced polycarbonate resin and elastomer
Gear holder ---- Aluminum alloy die casting
Battery ---------- Glassfiber reinforced polycarbonate resin (black)
Charger --------- ABS resin
Sealed cylindrical lithium-ion storage battery
Nominal voltage ------ DC 18 V
Nominal life ------------ Charging/discharging: Approx. 1,500 times
Nominal capacity ---- 3.0 Ah
Overcharge protection system:
(1) Battery voltage detection (- V system)
Battery temperature detection (dT/dt system) for Ni-MH and SUPER Ni-MH
batteries
(2) Battery surface temperature detection (thermistor)
(3) 120-minute timer
(4) Stop current detection (Li-ion batteries)
Power input: 95 W
Charging time: Approx. 45 minutes [for Type EBM 1830 battery at 20°C (68°F)]
Operable ambient temperature range: 0°C to 40°C (32°F to 104°F)
The maximum allowable temperature of the Type EBM 1830 battery
is 50°C (122°F).
Indication method of battery charging function
NOTE: The Model UC 18YRL cools the overheated battery by the cooling fan during the standby mode.
Main body unit (including battery) ------------------------------------ 2.4 kg (5.8 lbs.)
Charger unit (UC 18YRL, including cord) --------------------------- 0.6 kg (1.3 lbs.)
CJ 18DL (2MRK) --------------------------------------------------------- 5.9 kg (13.0 lbs.)
CJ 18DL (NN) ------------------------------------------------------------- 2.1 kg (4.6 lbs.)
Charger (UC 18YRL) ----------------------------------------------------------------------- 1
Battery (EBM 1830) ------------------------------------------------------------------------- 2
Blade (No. 41) -------------------------------------------------------------------------------- 1
Splinter guard --------------------------------------------------------------------------------- 1
Chip cover-------------------------------------------------------------------------------------- 1
Plastic case ------------------------------------------------------------------------------------ 1
Without charger, plastic case and battery
CJ 18DL
Wood 135 mm (5-5/16")
Mild steel 10 mm (3/8")
-1
0 to 2,400 min
26 mm (1")
25 mm (1")
DC magnet motor
45° (right and left)
White LED
-4-