Troubleshooting - Jensen MP6612i Installation And Operation Manual

Mobile receiver
Table of Contents

Advertisement

MP6612i

TROUBLESHOOTING

Problem
Cause
Does not operate
No power to yellow
(display does not
wire; no power to red
light)
wire
Inline fuse blown
No power to unit
Inline fuse blown
No speakers oper-
No speaker harness,
ate (display lights
speakers not con-
normally)
nected
Not all speakers
Incorrect splices or
operate
connections
Speaker wires shorting
to chassis ground or to
each other
Blows fuses
Power wire shorting to
ground
Speaker wires shorting
to ground
Incorrect fuse; fuse too
small
Corrective Action
Check connection with test
light; check vehicle fuse with
test light
Replace fuse
Check/replace fuse
Connect speaker harness;
check speaker wires
Check all splices and connec-
tions
Check splices; insulate all
bare wires
Make sure wire is not pinched
Make sure wire is not pinched
Install fuse of correct rating
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents