Troubleshooting - Jensen CD511K How To Install

CD511K

Troubleshooting

Problem
Does not operate (display
does not light)
No speakers operate
(display lights normally)
Not all speakers operate
Blows fuses
ER-1 appears on display
ER-2 appears on display
ER-4 appears on display
ER-7 appears on display
ER-8 appears on display
Can t find cause of problem
5598 CD511K_Ein.p65
Cause
No power to yellow wire
No power to red wire
Inline fuse blown
Speaker harness not connected
Incorrect splices or connections
Speaker wires shorting to chassis
ground or to each other
Power wire shorting to ground
Speaker wires shorting to ground
Incorrect fuse
Mechanical malfunction
High temperature
Data error
Disc focus error
Disc reading error
9
Corrective Action
Check connection.
Check vehicle fuse.
Replace fuse.
Connect speaker harness.
Check all splices and connections.
Check splices, insulate all bare wires.
Insulate wire.
Insulate wire.
Install fuse of correct rating.
Press RESET button.
Wait until temperature returns to normal.
Press RESET button.
Press RESET button.
Try a different CD.
Call Jensen Technical Assistance
(1-800-323-0221).
3/23/00, 2:05 PM
®
9