Using The Emr Pen To Perform Mouse Functions; Changing The Emr Pen Double-Click Speed; Calibrating The Emr Pen And Touch Input - Xplore iX101B2 User Manual

Using the EMR Pen to Perform Mouse Functions

Function
Selecting an object (Left-click)
Double-click
Right-click
Move or drag an object

Changing the EMR Pen Double-Click Speed

The pen double-click speed is in sync with the mouse double-click speed. To change the
speed, follow the instructions below.
1. From the Start menu, select Control Panel.
The Control Panel window opens.
2. Select Hardware and Sound.
The Hardware and Sound window opens.
3. From the Pen and Touch section, select Change tablet pen settings.
The Pen and Touch window opens.
4. From the Pen actions section, tap to highlight the Double-tap option, then tap the
Settings button.
The Double-Tap Settings window opens.
5. Using the EMR pen, drag the slider within the Speed section, to a faster or slower speed.
Note: Use the Test settings option to test and further calibrate the speed options
selected.
6. Once the desired settings have been selected, tap the OK button to save the settings.
7. Tap the OK button again to save the action and close the window.

Calibrating the EMR Pen and Touch Input

Calibrating the EMR pen and touch input settings adjusts the cursor position on the screen
relative to the position of the pen tip or finger. Calibrate the EMR pen to adjust the distance
error between where the pen or finger is actually touching the screen and where the
computer is registering the pen or finger touch. You may need to calibrate the pen or touch
input in the following situations:
•
The tablet is being used for the first time.
•
The previous user of the tablet writes with the opposite hand or at a different pen angle.
•
The tablet has not been used for some time.
•
The tablet has been serviced.
Chapter 3 Using the Tablet
Action
Tap the pen tip once on the object
Quickly tap the pen tip twice on the object
Hold the pen tip (or finger) directly on the object
for 1 second
Place the pen tip (or finger) on the object and move
or drag the content to the desired location
EMR Pen Operation 13