Backing Up Your System Into A Disc; Creating A Restore Point - BenQ Joybook R48 Series User Manual

4. A confirmation message appears. To proceed with the
operation, click Yes .
5. Follow the remaining on-screen instructions to complete the
operation.

Backing up your system into a disc

QDataTrove allows you to back up your system drive (C: drive)
into CD/DVD discs. It makes an exact copy of your entire
system drive (C: drive), including the operating system,
installed software programs, registry settings, etc. To perform
the operation, follow the steps below:
Back up
1. In QDataTrove, click the
2. Click the button to select
Backup to Disc .
3. A confirmation message appears. Click
Joybook, and it will enter Windows PE automatically to
make a system backup image.
4. After backup finishes, the system will boot into Windows 7
Create User Recovery CD/DVD
automatically. A
appears on the screen.
a. Select a disc type from the
menu.
tab.
System Drive Backup -
Yes
to restart your
window
Disc Category drop-down
OK
b. Click to proceed.
• To use this function, your Joybook must come with a CD/
DVD burner. If your model does not come with a CD/DVD
burner, use an external CD/DVD burner instead.
• The disc types (CD/DVD) and ability (reading/recording) of
the optical drive may vary depending on your purchased
model.
• The required number of discs may vary depending on the
size of your system image.
• If you want to back up the system to a USB flash disk, see
"Creating bootable USB flash disk" on page
5. Follow the remaining on-screen instructions to complete the
operation.

Creating a restore point

Restore Points are the earlier states of your Joybook's system
drive created by System Protection featured in Windows 7
System Restore. By default, restore points are created at specific
intervals and before significant system events, such as before
installing a new software.
Should your system become unstable or encounter unexpected
loss of data, you can then try to restore your system drive to its
previous state from a list of restore points.
For more information about System Protection, refer to Start >
Help and Support in Windows 7.
QDataTrove allows you to access
in Windows 7, and manually create a restore point whenever
needed. To perform the operation, follow the steps below:
Back up
1. In QDataTrove, click the
Recovering your system using QDataTrove
51.
Backup and Restore Center
tab.
47