Page 1
Joybook R42/C42 Series User Manual Welcome...
Page 2
Copyright Copyright 2007 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Overview....................1 Using QMedia Bar................24 About this book ................1 Setting up QMedia Bar..............24 Typographics.................. 1 Customizing the P1 hotkey (on Joybook R42 Series only)..24 Getting started..................2 Using BIOS setup .................25 Package contents................2 When and how to use BIOS setup..........25 Getting your Joybook ready for use..........
Page 4
Information on cleaning and battery maintenance......42 Battery maintenance ..............42 Cleaning your Joybook ..............42 Service and support................43 BenQ Joybook Global Online Service........... 43 Joybook online registration............43 Appendix ....................44 General safety information............44 Safety information about the battery..........44 Safety information about the AC adapter ........
Overview About this book Typographics This book provides you the main information about various components The usage of notes, tips and warnings is specifically for different in your Joybook and demonstrates how to use them. The following are purposes, which are described as follows. the major chapters of this book.
Getting started Depending on the model of your Joybook, the appearance may be different from the illustrations shown in this manual. Package contents Getting your Joybook ready for use Before using your Joybook for the first time, please check if you have all 1.
You can still use your When the battery is fully charged, the light goes off. Joybook while the battery is charging. Joybook R42 Series Connect the power cord to the power adapter. Connect the power adapter to the power socket on your Joybook.
Page 8
3. Opening your Joybook Gently lift up the latchless lid that allows you to open the case easily. 4. Performing initial setup Joybook R42 Series Joybook C42 Series Press the Power button to start up your Joybook, and then follow the on- screen instructions to complete the initial Windows Vista setup.
Expanding the capabilities of your Joybook Connect an external display device (such as a monitor or projector) to the Access local area network (LAN) by connecting a network cable to the 15-pin D-sub video socket of your Joybook. LAN port of your Joybook. Connect a telephone line to the modem port of your Joybook and dial-up Insert an ExpressCard/34 module or ExpressCard/54 module to further to the Internet or send a fax.
Page 10
Use the optical drive to access data on various kinds of discs and enjoy Connect a microphone to the microphone socket to record sounds. movies or music. Connect an earphone to the audio output socket to output sounds. Connect USB peripherals to the USB ports of your Joybook. Getting started...
When the system is in Suspend mode, it lights up in amber. • When the system is in Hibernation mode or powered off, the light goes off. Joybook R42 Series (10) Keyboard (1) LCD (Liquid Crystal Display) panel (2) Quick access buttons Internet hotkey Starts up the Internet Explorer Web browser.
Page 12
The items listed here are those which are different to the “Joybook R42 Series” shown on page 7. (1) Quick access buttons Internet hotkey Starts up the Internet Explorer Web browser. E-mail hotkey Starts up the Windows Mail e-mail client. Bluetooth hotkey Turns Bluetooth in your Joybook on or off.
Left side view 15-pin D-sub video socket USB port For connecting external display devices, such as monitors and projectors. For connecting peripherals such as mice, digital cameras and MP3 players that use the USB 2.0 interface. (2) Ventilation holes (6) ExpressCard slot For dissipating heat and keeping the computer at an optimal temperature.
Right side view (1) DVD/CD-RW Combo/DVD Super-Multi drive (3) Manual tray opening (available on selected models) If you wish to open the disc tray when your Joybook power is off, or it The type of the optical drive varies by model, and the support of disc can’t be opened using the ejection button, insert a pointed object (like an types depends on the optical drive that comes with your Joybook.
• To remove the cover, a small Phillips head screwdriver is required. • For more information about adding additional memory, the limit of maximum memory, or the types of BenQ certified memory modules for your Joybook, refer to "Installing additional memory" on page (2) Battery retainer B Secures the battery in place.
Indicators Joybook R42 Series Joybook C42 Series (1) Wireless network/Bluetooth indicator (3) Battery indicator • When the wireless LAN is on, it lights up in blue. • When the system is on and the battery is in use, it lights up in blue.
Getting started with Windows Vista Turning off your Joybook properly Depending on your purchased model, your Joybook may come pre- installed with the latest Microsoft operating system: Windows Vista™ Home Basic. By Windows default, the Start menu power button puts your Joybook into sleep.
Shuts down your Joybook. To open Windows Mobility Center, simply press the <Fn> + <F10> Installs the Windows updates when available, and hotkey combination (on Joybook R42 Series), or press the + <x> then shuts down your Joybook after the hotkey combination (on Joybook C42 Series).
Using your Joybook Using the touchpad Joybook R42 Series Joybook C42 Series The touchpad with its buttons is a pointing device that functions as an optional external mouse, which can perform navigation, scrolling and Function Left touchpad Right touchpad Touchpad selection functions.
Using the keyboard (for Joybook R42 Series only) Function hotkeys You can use the function hotkeys to access commonly used functions or make quick settings. To use the hotkeys, press and hold the <Fn> (Function) key at the lower left corner of the keyboard, and then press the desired hotkey.
Windows keys and lock keys Windows Key Cancels minimization of all windows. <Shift> + + <M> Functionally equivalent to clicking the Start button on the Windows desktop. Press and hold the Windows key, and then Activates the Run dialog box. + <Tab>...
Using the keyboard (for Joybook C42 Series only) Function hotkeys You can use the function hotkeys to access commonly used functions or make quick settings. To use the hotkeys, press and hold the <Fn> (Function) key at the lower left corner of the keyboard, and then press the desired hotkey. <Fn>...
Windows keys and lock keys Windows Key Cancels minimization of all windows. <Shift> + + <M> Functionally equivalent to clicking the Start button on the Windows desktop. Press and hold the Windows key, and then Activates the Run dialog box. + <Tab>...
1. Make sure that you are located within the wireless network service area. 2. Turn on WLAN. • For Joybook R42 Series: Press the <Fn> + <F12> hotkey combination several times until WLAN is “ON”. 6. Click a network and then click Connect. If security authentication is not required by the network you are using, there will be a successful message showing that you have connected to the network.
Connecting to a Bluetooth device 1. Turn on Bluetooth in your Joybook. • For Joybook R42 Series: Press the <Fn> + <F12> hotkey combination several times until Bluetooth is “ON”. • For Joybook C42 Series: Press the Bluetooth hotkey on your Joybook.
• If you have not entered your passkey after a while, the connection will 5. The system will begin searching for available Bluetooth devices nearby. be cancelled for security concern. Try to enter your passkey again. After it finishes searching, you will see a list of found devices. 7.
Page 27
2. Click Add to select the files on your Joybook to be sent to the Bluetooth device. 3. Under the Transfer-enabled device area on the same screen, place a check mark next to the desired Bluetooth device and then click Send. 4.
Using QMedia Bar Customizing the P1 hotkey (on Joybook R42 Series only) QMedia Bar integrates a number of software Using QMedia Bar, you can set up the P1 hotkey on your Joybook R42 applications to enhance the multimedia experience on your Joybook.
Using BIOS setup BIOS (Basic Input/Output System) is a layer of software, called firmware, To run BIOS setup, press the <F2> key immediately when the BenQ logo that translates instructions from other layers of software into instructions appears on the screen during system startup. The logo shows up on the that Joybook hardware can understand.
<Enter>, <Tab>, or <Shift> + <Tab> to change the next the device value. To select a boot device manually, press the <F9> key when the BenQ logo • System Date: allows you to set the date of the system. Type in the value appears on the screen during system startup.
Exit menu The Exit menu displays ways of exiting BIOS setup. After finished with your settings, you must save and exit so that the new settings can take effect. Exit Saving Changes: saves the changes you have made and exits BIOS •...
Restore to proceed according to your need. c. Follow the on-screen instructions to complete the task. The backup creates a “BenQ user” folder on the D: drive, which can be burnt to disk and archived independently of QDataTrove. Recovering your system...
1. Turn on your Joybook. Full System Restore - Backup Image. 2. Press the <F9> key when the BenQ logo appears on the screen during b. Follow the on-screen instructions to complete the task. system startup. A Boot Devices screen appears.
Protecting your Joybook from viruses When you finish reinstalling the operating system, be sure to remove the “Operating System Disc” from your optical drive. and other security threats 10.Restart your Joybook. To make Joybook operate properly, it requires the reinstallation of the Your Joybook comes with an Anti-Virus CD, so please be sure to install drivers and software programs located on the “Drivers and the anti-virus software from the disc supplied.
Joybook and the external display device automatically. Pressing the <Fn> + <F3> hotkey combination on your Joybook R42 Series, or the <Fn> + <F5> hotkey combination on your Joybook C42 Series allow you to switch between Joybook’s own screen and the external display device, or use simultaneous display.
2. Slide the battery retainer A to the unlock position. Before you upgrade or replace memory, please check on the BenQ web site to determine the module which can be used, or contact BenQ distributor or customer service center. It is recommended that you take your Joybook to the BenQ distributor or customer service center for the upgrade or memory replacement.
Page 37
• Ground yourself to your Joybook with professional grounding 4. The memory cover is secured with 7 screws. Use a screwdriver to equipment like an anti-static wristband, or touch the metal surface on remove these screws. the inside of your Joybook to discharge any static electricity. •...
Page 38
8. Replace the cover. 10.Place the battery on its original position (1) and then slide the battery retainer A to the to the lock position (2). Connect the AC adapter. When you start Joybook, it will automatically test and configure the new memory.
Joybook, along with basic troubleshooting steps. If you time? are not able to resolve the issue, immediately contact a BenQ service Recharge the battery or discharge it to about 40% full, and then store it in center for assistance.
What should I do if the battery gets hot in my Joybook? Can't connect to the Internet with the built-in network interface on Joybook? Take the battery out and let it cool down. If the problem persists once it is inserted back into the Joybook, the battery could be defective and it may Check if the network has a fixed MAC address.
How do I update the driver? the program is necessary to be left in the Startup folder. Please visit BenQ Online Service and Support 5. Select unwanted program icons, right-click on them and select Cut. (http://Support.BenQ.com) to search for driver updates.
Page 42
• The speakers may have been turned off. computer and try again. • For Joybook R42 Series: Use the <Fn> + <F7> hotkey combination to turn them on. USB devices quit working unexpectedly in Windows Vista. • For Joybook C42 Series: This is because USB devices such as camera, scanners.
Page 43
CD or DVD does not function. Example of a 40GB hard drive: Please verify the following: Calculation by drive makers Calculation by OS developers • Joybook is turned on, and the CD or DVD discs are properly inserted in 40GB=40,000MB 40GB=40,960MB the center of the disc tray in the optical drive.
Should I drain the battery of my Joybook every time before charging to • The screen's brightness may be set too low. retain its capacity? For Joybook R42 Series: Use the <Fn> + <F5> hotkey combination to increase the No. Your Joybook comes with an Lithium-Ion (Li-Ion) battery pack. This brightness.
Page 45
How can I judge if my LCD panel is out of order and what should I do if it happens? If your Joybook cannot display images at the default resolution, please visit the BenQ web site to download and update the latest Joybook display drivers. Contact your BenQ dealer if either of the following phenomena occurs: •...
Information on cleaning and battery maintenance Battery maintenance Cleaning your Joybook 1. Fully charge/discharge battery up to 4 cycles before achieving full When cleaning the Joybook, follow these steps: capacity of a new battery. 1. Turn off the Joybook, disconnect the AC adapter, and remove the 2.
FAQ: Contains answers to frequently asked questions about the Joybook as well as additional tips. • Contact Center: Here you can directly contact BenQ Customer Service for answers and advice to your questions. You can also obtain the information about the BenQ service stations in your country.
12.The AC adapter is a high-voltage component. Do not attempt to repair it yourself. Should it become damaged, please contact an authorized BenQ distributor or service center. 13.Make sure that the modem port is used only with a regular analog phone line.
Safety information about the modem Company name, address, telephone & fax no. Name: BenQ Europe B.V. Caution Ekkersrijt 4130, 5692 DC Son Address: Never connect telephone wiring during a lightning storm. There may be a The Netherlands remote risk of electric shock from lightning.
Safety instructions for Poland, Romania, Slovenia, Bulgaria, Latvia, and Croatia Polski Slovensko 1. Należy upewnić się, że zastosowano się do wszystkich instrukcji i 1. Glede sistema sledite navodilom in opozorilom. ostrzeżeń dotyczących systemu. 2. Raèunalnika ne postavljajte na mesta z moènim magnetnim poljem. 2.
Page 51
Latviski 1. Sekojiet visām sistēmai atbilstošajām norādēm un brīdinājumiem. 2. Nenovietojiet datoru tuvu spēcīgiem magnētiskajiem laukiem. 3. Nepareizi nomainīts akumulators var uzsprāgt. Mainiet akumulatoru tikai pret tādu pašu vai līdzvērtīgu ražotāja ieteiktu akumulatoru. Utilizējiet izlietotos akumulatorus saskaņā ar ražotāja norādēm. 4.