Upgrading Or Replacing The Memory - BenQ Joybook R48 Series User Manual

Upgrading or replacing the memory

You can replace the existing memory module with a higher-
capacity one. Before you upgrade or replace memory, please
check on the BenQ web site to determine the module which can
be used, or contact BenQ distributor or customer service center.
It is recommended that you take your Joybook to the BenQ
distributor or customer service center for the upgrade or
memory replacement.
For details about the limit of maximum memory, refer to the
product information from http://www.BenQ.com.
To find out the types of BenQ certified memory modules for
your Joybook, try the steps below:
1. Connect to BenQ Online Service and Support
(http://www.benq.com/support/).
2. Click Knowledge Base.
The website layout and content may vary by region/country.
• If you install an uncertified memory module, your system may
not work properly.
• Your Joybook may come with a built-in memory module pre-
installed on the motherboard. If you want to have it replaced,
please contact your dealer for assistance. Do not replace it
yourself to avoid voiding the warranty.
• It is the sole responsibility of the user if problems (such as
data loss and system failure) occurred due to non-factory
installed software, parts, and/or non-original accessories.
1. Shut down your Joybook completely. Disconnect the power
adapter and turn over your Joybook.
Battery
Memory
cover
2. Slide "Battery retainer B" to the left to its unlock position.
Battery retainer B
Upgrading or replacing the memory 53