Creating A User Recovery Cd/Dvd; Creating An Application And Driver Dvd - BenQ Joybook R48 Series User Manual

5. The disc burning process starts. A
Recovery CD/DVD
displays the current status.
Please note that the burning process cannot be interrupted
once started.
6. Continue to create a factory default Application and Driver
DVD. Repeat Step 2 to Step 5 to complete the disc burning
process.
7. After disc burning finishes (the progress bar shows 100%
completion), click
window to proceed.
Exit Yes
8. Click > to leave the application.
Store the discs in a safe place for future use.

Creating a User Recovery CD/DVD

You can use QDataTrove to create recovery discs that include
your own backup system image file.
1. Click the button to select
DVD .
2. Select a disc type from the
menu, and then select the source of your system image file in
Source Image
. Click
3. Insert a blank disc when prompted to do so, and then click
Yes
.
4. Select your preferred burning speed, and then click
50 Recovering your system using QDataTrove
Create Factory
window appears on the screen and
at the upper right corner of the
Create User Recovery CD/
Disc Category
drop-down
OK
to proceed.
5. The disc burning process starts. A
CD/DVD window appears on the screen and displays the
current status.
Please note that the burning process cannot be interrupted
once started.
6. After disc burning finishes (the progress bar shows 100%
completion), click
window to proceed.
Exit
7. Click >
Store the discs in a safe place for future use.

Creating an Application and Driver DVD

You can use QDataTrove to create a disc that includes
applications and drivers that are bundled with your Joybook.
1. Click the
Driver DVD
2. Select a disc type from the
menu. Click
3. Insert a blank disc when prompted to do so, and then click
Yes
.
4. Select your preferred burning speed, and then click
5. The disc burning process starts. A
Driver DVD
current status.
OK
.
Please note that the burning process cannot be interrupted
once started.
Create User Recovery
at the upper right corner of the
Yes
to leave the application.
button to select Create Application and
.
Disc Category
OK
to proceed.
Create Application and
window appears on the screen and displays the
drop-down
OK .